1900/25 vibration monitor

       1900/25 vibration monitor

       1900/25 vibration monitor

　　1.Only standard differential expansion capabilities provided.For ramp differential expansion and

　　complementary input differential expansion,use the 3500/45 Position Monitor,instead.

　　2.The 3500/42M provides individual 4 to 20 mA proportional outputs for each channel.The

　　3500/40M does NOT provide 4 to 20 mA outputs.

　　3.The monitor channels are programmed in pairs and can perform up to two of these functions at

　　a time.Channels 1 and 2 can perform one function,while channels 3 and 4 perform another(or

　　the same)function.

　　4.Channels configured for velocity or acceleration provide only direct amplitude.Channels

　　configured for Velocity II or Acceleration II provide 1X amplitude/phase and 2X amplitude/phase

　　and bias voltage in addition to direct amplitude.

　　5.Any vibration channel can be configured for conventional“pie-shaped”acceptance region

　　alarms.When configured for circular acceptance regions,circular(rather than pie-shaped)

　　acceptance region alarms can be enabled.Refer to the 3500/42M Operations/Maintenance

　　Manual for additional information,or contact your nearest sales professional.

　　6.Only channels 3 and 4 can be used for Case Expansion measurements.

　　7.The 3500/46M provides frequency response characteristics suitable for use on machines with

　　very slow rotational speeds,such as hydraulic turbine/generator sets,which often operate at

　　speeds of 100 RPM or lower.Also,special signal conditioning and tracking filtering is provided,

　　allowing detection of rough load zone operation,shear pin failure,and other hydro-specific

　　conditions.

　　8.The 3500/50M is not intended for use in overspeed protection applications.Use the 3701/55

　　Emergency Shutdown(ESD)system,instead.

　　9.Both Zero Speed and Reverse Rotation channel types require both channels of the 3500/50

　　module,making it a single-channel monitor when used in these configurations.

　　10.The 3500/60 and 3500/61 provide identical functions except the 3500/60 does not provide 4 to 20

　　mA proportional outputs.When these outputs are required,use the 3500/61.

　　11.The 3500/62 is designed to accept static proportional signals such as 4 to 20 mA,1 to 5 Vdc,or

　　any static proportional voltage signal between–10 and+10 Vdc.When dynamic signals(i.e.,

　　those where waveform information is required)are used,a 3500/40M or 3500/42M can often be

　　programmed as a custom channel type,making the 3500 system compatible with virtually any

　　static or dynamic signal from pressure,level,temperature,vibration,flow,position,speed,or

　　other transducers.Consult the factory or your local Bently Nevada sales professional for more

　　information.

　　12.The 3500/64M is primarily intended for monitoring combustor pressure pulsation instabilities

　　(“humming”)in gas turbines.

　　→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→

　　Address:Unit 2009,No.1733,Luling Road,Siming District,Xiamen,Fujian,China

　　Company:Xiamen Xiongba E-commerce Co.,Ltd

　　→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→→

　　Why are the prices of many products of our company more competitive?

　　(1)Source purchase to reduce the price difference in the intermediate phase

　　(2)Stable channel and more guaranteed supply

　　Lead time problem

　　(1)For the spot products in stock,the delivery can be arranged on the same day after the contract payment is signed

　　(2)Order products and deliver according to the quoted delivery date

　　The following are our company's superior products(most of which are used daily)and the ones that are not commonly used are not listed,but all of which have been done.Welcome to your consultation!

　　★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★★

　　Main business：

　　Xiamen Xiongba E-Commerce Co.,Ltd.is a professional spare parts service provider in the field of industrial automation.We mainly deal in PLC modules,DCS cards,ESD system cards,vibration monitoring system cards,turbine control system modules,and gas generator spare parts.We have established close cooperation with many world-famous PLC and DCS product maintenance service providers.

　　The company's products are widely used in CNC mechanical metallurgy,oil and gas,petrochemical,chemical,paper and printing,textile printing,machinery,electronic manufacturing,automobile manufacturing,tobacco,plastic machinery,power,water conservancy,water treatment/environmental protection,municipal engineering,boiler heating,energy,power transmission and distribution and other industries.

　　The company's main products,superior supply and sufficient inventory:

　　①GE gas turbine cards:IS200 series,DS200 series,etc.(for example:DS200DCFBG1A,IS200TRPGH1B,369-HI-R-M-0-0-0-E,DS200PCCAG1A,VMIVME-7807RC)

　　②Woodward:controller,etc.(e.g.9907-165,5466-409,9907-164)

　　③ABB PLC system module DCS system card,including some control system module cards out of production.(For example:PM645B,5SHY3545L0014,PM630,07AC91D,SPHSS13,PP845,PFEA111-20,PFEA112-65)

　　④Triconex:Redundant fault-tolerant control system,the most modern fault-tolerant controller based on triple module redundancy(TMR)structure.(e.g.3721,3625,3008,4351B,3805E)

　　⑤Foxboro:I/A Series system,FBM(field input/output module)sequence control,etc.(for example:FBM201,CP270,CP40B,FCP280,ZCP270).

　　⑥Bently Nevada:card of 3500 system.(3500/05 framework，3500/15 power module,3500/20 frame interface，3500/22M transient data interface module,3500/25 improved bonding module，3500/32 4-channel relay module，3500/33 16-channel relay module，3500/40M Proximitor displacement monitor module，3500/42M displacement/velocity acceleration monitor，3500/34 Triple module redundant (TMR) relay module，3500/45 displacement monitor,3500/46M monitor module,3500/50 speed module,3500/53 electronic overspeed detection system module,3500/60 temperature monitor module,3500/61 temperature monitor module,3500/62 process variable monitor module,3500/72M piston rod position monitor module,3500/77M cylinder pressure monitor module,3500/92 Communication gateway,3500/93 system display unit)

　　⑦HIMA(black horse):F8650X,F8627X,F8651X,F8652X,F35,etc

　　⑧XYCOM:I/O,VME board,processor,etc.(For example:XVME-653,XVME-674,XVME-976)

　　⑨Rockwell(Allen Bradley):1756 and 1757 series.(e.g.1756-L73XT,1756-L61,1757-SRM)

　　⑩Reliance:discontinued spare parts(such as 0-60002-6,S-D4022,S-D4006-D)

　　12.EPRO:MMS6000 system card MMS3000 system card.(For example:MMS6312,MMS6120,MMS6120)

　　13.Westinghouse:5X00105G14,5X00119G01,1X00416H01,1X00416H01

　　14.Schneider:140 series processor,control card,power module,etc.(For example:140CPU67160C,140CPU67260,140CPU65150,140CPU43412,140NWM10000)

　　15.ABB:DSQC series of industrial robots.(Series:DSQC202,DSQC545A,DSQC627,DSQC352,DSQC679)

　　16.Rexroth:I/O module,PLC controller,etc.(e.g.TVD1.3-15-03,KDV3.1-100-220)

　　17.Motorola:MVME 162,MVME 167,MVME1772,MVME177 and other series.

　　Our company has many advantageous brands.At present,we have sufficient stock and ready to ship.If we need to order,the delivery time is short.We can order directly from abroad.Please call us for specific models;With sufficient inventory,sound network,perfect logistics and favorable prices,we can provide you with whatever you want and meet your needs at any time.We return your visit with the most favorable price!

　　Xiamen Xiongba E-Commerce Co.,Ltd.provides control system components,products and services for user installed control systems.Distributed control system,programmable controller,panel controller and driver,we provide quick and convenient spare parts supply in more than 65 different countries in the world.

　　Our service standards reduce customer downtime and maintenance costs,reduce all industrial machinery and production equipment operating failures,and extend the life of the control system!

　　[Xiamen Xiongba Technology Global one-stop DCS PLC Spare Parts Direct Sales Network]It is a first-hand source of goods,and no middleman can make a difference!

　　The inventory of commonly used industrial automation parts is far away nationwide!