This DS3800DBIB1 GE printed circuit board was manufactured by General Electric for use in the Mark IV Speedtronic Series.

.Many products are not yet on the shelves please contact us for more products

.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation

.We have 20 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

Product Description

The DS3800DBIB1 manufactured by GE is a small printed circuit board (PCB) designed as a component of a Speedtronic Mark IV system. The Mark IV system was designed to be modular and affordable with built-in redundancies between chipsets. This allows for the expected occasional electronics failure within a module without the failure of the turbine system as a whole, as control of the system is shifted as needed until repairs can be made to a failing part. The Speedtronic Mark IV can be used for emissions, air or fuel control, shutdown procedures, or cool-down procedures. The DS3800DB1B1 card is designed to be used as an interface board.

The DS3800DBIB1 is an auxiliary daughterboard designed to plug into a larger PCB. It has four connectors for that use embedded in the board, numbered 1 through 4. It has also been drilled out at the factory with one hole at each corner of the board for another mounting option. The DS3800DBIB1 has a total of ten 5-banded resistors and six CR capacitors mounted on its board. There is also on polypropylene capacitor. This is marked C100 and is rated 708A1, M/E 200V 1.0+10%. There is a blue potentiometer (3069P-1 103 10K,) rated 10K Ohm, located on the bottom edge of the board.

Our products include distributed control system (DCS), programmable logic controller (PLC), Motorola mvme industrial control module, industrial control communication converter (anybus), remote output / input module (RTU), industrial control machine (IPC), industrial low frequency screen (IPC), human-machine interface SCSI (50, 68, 80pin) anybus (gateway) has become Global industrial automation spare parts sales company! Welcome to contact us by email.www.xbplcdcs.com

The main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mining, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.

http://www.xbplcdcs.com/login.php

http://www.xbplcdcs.com/login.php

http://www.xbplcdcs.com/login.php

The DS3800DBIB1 is a printed circuit board designed by General Electric (GE) for its Speedtronic Mark IV turbine control system. The relevant introduction is as follows:

Functional use: It is an interface board, as an auxiliary sub-board, can be inserted into a larger printed circuit board, used to connect different components or modules, to achieve signal transmission and interaction, in the Mark IV system plays the role of interface and signal processing, to help coordinate the communication and operation between various parts of the system. For example, in the control system of a turbine, it may be used to connect sensors, actuators, or other control modules so that they can work together to achieve precise control of the turbine, such as emissions, air or fuel control, shutdown procedures, or cooling procedures.

Appearance and structure: This is a small printed circuit board with four connectors, numbered 1 to 4, for connecting with other circuit boards. There is a drill hole in each of the four corners of the board, providing an alternative installation method. The board is also fitted with ten 5-color band resistors, six CR capacitors and a polypropylene capacitor, as well as a blue potentiometer, rated at 10 kilohm, located on the bottom edge of the board.

Since the Mark IV system has been discontinued by General Electric, official support is no longer available. However, some third-party suppliers, such as AX Control, still keep inventory of the system components and provide related repair services