GE Printed Circuit Board DS3800DCMB1D1C

.Many products are not yet on the shelves please contact us for more products

.If there is any inconsistency between the product model and the picture on display, the model shall prevail. Contact us for the specific product picture, and we will arrange to take photos in the warehouse for confirmation

.We have 20 shared warehouses around the world, so please understand that it can sometimes take several hours to accurately return to you. Of course, we will respond to your concerns as soon as possible

http://www.xbplcdcs.com/login.php

Product Description

The GE Printed Circuit Board DS3800DCMB1D1C features 1 40-pin connector and multiple EPROM modules. It also is populated with 4 indicator LEDs, 7 jumpers, and 1 20-pin connector. The 40-pin connector is the primary cable by which signals are transmitted from the board and also received by the board. The ribbon cable is approximately 8 inches long because it is engineered to plug into a connector that is only a short distance from the board when it is installed in the drive. A maximum of 40 separate signals can use the cable for transmitting and receiving.

The ribbon cable is easily damaged, so before you unplug it consider the following information. To unplug a ribbon cable, do not tug the cable because it will separate the ribbon cable from the connector. This is the case because the fine wires that comprise each connection are easily separated from the plastic connector. Instead, place your hand on the connector and pull it away from the board to disconnect it. To reconnect the ribbon cable, use one hand to hold the connector at the end of the ribbon cable and align it with the connector on the board. Press it into the connector when you are ready.

Once the board is installed and the drive is operational, you can view the LEDs to monitor the operation of the board. The IDs of the 4 LEDs are TXDA, RXDA, DTSA, and CDA. When the LEDs are flashing, it shows that processing is taking place

Xiamen Xiongba Electronic Commerce Co., Ltd. is a professional sales company of world famous brand (DCS system) (robot system) (large servo control system) module spare parts. 

Our products include distributed control system (DCS), programmable logic controller (PLC), Motorola mvme industrial control module, industrial control communication converter (anybus), remote output / input module (RTU), industrial control machine (IPC), industrial low frequency screen (IPC), human-machine interface SCSI (50, 68, 80pin) anybus (gateway) has become Global industrial automation spare parts sales company! Welcome to contact us by email.www.xbplcdcs.com

The main products are widely used in metallurgy, oil and gas, glass manufacturing, aluminum, petrochemical, coal mining, paper printing, textile printing and dyeing, machinery, electronics manufacturing, automobile manufacturing, tobacco, plastic machinery, electric power, water conservancy, water treatment/environmental protection, municipal engineering, boiler heating, energy, power transmission and distribution, etc.