5301-MBP-DFCM PROSOFT Redundant module

PROSOFT 5301-MBP-DFCM 18 to 32v DC MODBUS PLUS to DF1 master/slave communication module parameters

PROSOFT 5301-MBP-DFCM 18 to 32v DC MODBUS PLUS to DF1 master/slave communication module parameters

This ProLinx Modbus Plus to DF1 master/slave gateway establishes a powerful connection between devices on the Modbus Plus network and DF1 slave devices. This stand-alone DIN rail mounting protocol gateway offers one Modbus Plus configurable DB-9F port and up to four configurable serial ports.

The Modbus Plus protocol driver supports host and slave implementations of the protocols on the DB9 Modbus Plus parent port. The Modbus Plus port is fully configurable. The DF1 protocol driver supports a host or slave implementation of the protocol on each DF1 port. All DF1 ports can be configured separately.

Features and Advantages

The -MBP-DFCM module is an ideal solution for many applications where the Modbus Plus connection can be used to integrate DF1 devices into the system. The Modbus Plus gateway is a powerful module designed with server support for easy connection to Rockwell Automation PLCS (CLX, SLC, PLC, CPLX and similar devices). Combined with DF1 device support, this module provides a very powerful interface to many DF1 devices used in the industrial market today. The module is used in most industries, especially manufacturing, oil and gas, power and food processing.

specification

Power Supply - 24 VDC nominal 18 to 32 VDC Positive, negative, GND terminal 2.5 mm screwdriver blade

Current load - Max. 500mA @ Max. 32 VDC

Operating temperature :-4 F to 122 F (-20 C to 50 C)

Storage temperature :-40°F to 185°F(-40°C to 85°C)

Relative humidity - 5% to 95%(no condensation)

Size standard :- Height 5.20 inches x width 2.07 inches x depth 4.52 inches (13.2 cm x 5.25 cm x 11.48 cm)

Extension:

5.20 inches high x 2.73 inches wide x 4.52 inches deep (13.2 cm x 6.934 cm x 11.48 cm)

LED indicators - Power and module status, application status, serial port activity, serial port error status

Configured serial port - DB-9M RS-232 only, no hardware handshake