Product description

          IC695CPU315 is a 1 GHz CPU of GE Fanuc PACSystems RX3i series. It has an Intel Celeron-M microprocessor with 20 MB of user memory (also known as random access memory or RAM) and 20 MB of flash memory. As a programmable controller, IC695CPU315 can perform up to 32K I/O operations per second. It supports up to 512 program blocks, each with a maximum size of 128 KB. IC695CPU315 uses dual backplane bus to communicate with I/O and intelligent option module.

       RX3i CPUs like this are designed for real-time control of machines, processes and material handling systems. They can be programmed in C language or three of the five programming languages approved by IEC (International Electrotechnical Commission). Specifically, from the IEC language list, you can program IC695CPU315 using ladder logic (ladder diagram), structured text or function block diagram language. Only the sequential function diagram and instruction list language options are not applicable.

        IC695CPU315 adopts floating point algorithm, and firmware can be upgraded in the system. Auto-located symbolic variables can use as much memory as needed, up to 20 MB of user memory capacity. The CPU is factory configured with two front ports, one RS-485 serial port and one RS-232 serial port. Therefore, you have a 9-pin connector and a 15-pin connector at the same time. CPU supports SNP, serial I/O and Modbus slave and master serial protocols. IC695CPU315 also supports most older GE Fanuc series 90-30 modules and expansion racks.

technical specifications

Processing speed: 1GHz

CPU memory: 20 megabytes

Floating point: Yes

Serial port: 2

Serial protocols: SNP, serial I/O, Modbus slave and master

Embedded communication: RS-232, RS-486

IC695CPU315 central processor or CPU belongs to PACSystems RX3i series products designed by GE Fanuc. It has 20 MB of battery-powered RAM, 20 MB of nonvolatile flash user memory, 3.3 V DC and 1 or 5 V DC and 1.2 A power requirements, embedded communication options, an operating temperature range of 0 to 60 degrees Celsius, and up to 512 program blocks. It provides dual backplanes to efficiently communicate with I/O. The module provides two serial communication ports, namely RS-232 and RS-485 ports. The rack-based Ethernet interface module can be used to establish Ethernet communication. The IC695CPU315 CPU can be programmed in multiple languages such as ladder diagram, structured text, function block diagram or C programming language.

IC695CPU315 central processor is compatible with programmer and HMI equipment, and is used to control and monitor the whole plant. It has a dual backplane and provides high-speed serial bus and RX3i PCI. The typical Boolean execution speed of this module is 0.047 milliseconds per 1000 Boolean instructions. It meets PCI 2.2 standard in electrical aspect. The main features of IC695CPU315 CPU include access to mass memory, configurable data and program memory, upgradeable firmware in the system, and embedded communication supporting serial protocol. It is compatible with most 90-30 series modules, communication modules, and expansion racks. When installing the battery, be sure to install the CPU on the rack and power up the rack before connecting the battery.

There are too many imported products to display one by one

Call for specific model

Head of Asia Pacific: David Lee

Tel: 18059884790

QQ:1033732479

Email: 1033732479@qq.com

WeChat: Ymgk3

All products are used in: power, oil, mine lifting, port, heat supply, gas, water supply, sewage treatment, metallurgy, paper making, textile, chemical, water conservancy and other modern industrial fields!

1. Power Plant DCS Monitoring System

2. Manufacturing of Intelligent Flat Tempering Furnace System

3. PLC Programmable Conveying Control System

4. DCS Distributed Control System

5. Intelligent Fire Water Supply Control System

6. Computer Control System for Constant Flow of Pharmaceutical Liquid in Chemical Plant

7. Electrical control system: integrated automatic control system for paper making, printing and dyeing production line and substation