IS200AEPAH1AFD Technical Specifications

Product Description

Manufactured with the capability to connect an optional auxiliary board, the IS200AEPAH1AFD board is labeled simply as a printed circuit board. If you have decided to use an optional auxiliary board it will communicate with the AEPA board via two-pin connectors. The two pin connectors used for the communication between the auxiliary board and the AEPA board are male pin connectors which are located in the top left corner of the board. Some other components of this board are two three-plug connectors, six metal oxide varistors (MOVs), and many others. The MOVs on this board are lined up together and located in the upper right-hand corner that are red in color. 

When the IS200AEPAH1AFD board has been mounted in the Mark VI Turbine Control System it will be located in a VME rack, the VME rack will have twenty-one or thirteen slots. This board will only occupy one VME slot. There are multiple redundancy models that the AEPA board can be used with such as simplex, dual, or triple redundancy, the board can actually be used with several of these redundancy types at the same time depending on what you have decided to run the model on. 

There are two different types of communication that can be used with the IS200AEPAH1AFD model which are IONet or Unit Data Highway (UDH). The UDH is an Ethernet-based LAN that allows for communication with not only other boards in the Mark VI System but the Fanuc family of PLC-based controls which are also made by General Electric, as well as EX2000 Generator Excitation Controls. The other systems that can be used can be found in the GER-4193A Turbine Control System Instruction Guide. 

Reviews For IS200AEPAH1AFD

Internal Review

     (5.0)

This model can be used with two different communication types ranging from the Ethernet-based LAN Unit Data Highway or the IONet. These are peer-to-peer communications which means that the models can communicate with each other. - AX Control Technician