Product Description

The DS200CTBAG1ACC printed circuit board functions as a GE Mark V Common Data Processor Termination board. While this part has now been placed into legacy status by General Electric and is no longer supported by the original manufacturer, our company works hard to maintain on-hand stock so we can better provide our customers with replacements as needed. 

The DS200CTBAG1ACC is a long and narrow PCB that is used as a termination board for the Mark V’s common data processor.   The card is typically placed in <R5>.  The board contains both IONET and COREBUS communication interfaces for the system, as well as I/O terminations.  Analog signals from this board connect to and are conditioned by the DS200TCCA board. 

The DS200CTBAG1ACC accepts 4-20 mA input and output signals as well as shaft voltage and shaft current signals.  The board has a bypass relay on its surface.  This allows continued COREBUS communications even when power is lost to the CTBA board. 

The DS200CTBAG1ACC includes two terminal strips, vertical pin connectors, a relay, resistor network arrays, plug connectors, and jumper switches.  The board is marked with the GE logo and also carries its identifying board number.   The board has been drilled in each corner to allow for mounting options; some of these drill holes are ringed with conductive material. 

GE manuals will provide you with additional details about this board. Handling guidelines and warnings are provided in original GE documentation.  These should be read before you unbox your part purchased from AX Control.