Product Description

Product Description

The DS200FGPAG1AKD is a circuit board designed by GE for the Mark V series. Created for the Speedtronic line, it was designed for usage in controlling gas and wind turbines. The Mark V series includes built-in diagnostics and a triple-redundant design that can also be used with a Simplex system should the need arise. This series also offers online maintenance as well. General Electric no longer manufactures this part, but it is available from AX control as a reconditioned and fully-tested unit.

The DS200FGPAG1AKD has over twenty-five integrated circuits as well as five resistor arrays. This board has several electrolytic capacitors as well as twenty-three heat sinks scattered across its surface, in addition to the singular varistor and ceramic disc capacitor. The board also sports a line of red diodes. The board has three transformers set on its surface, as well as an inductor coil. There are also holes drilled into the corners, around the edge, and in the direct center of the board to allow for mounting. Beyond that, there are numerous metal film and CCR resistors set into the board as well. Each and every component is labeled with either a manufacturer’s identification number or a reference designator.

Manuals, technical sheets, and usage guides are excellent in assisting in the proper installation, usage, and general safety of this part. However, these things can be scarce or hard to come by. If you no longer have access to any of these things, please ask us when you order for a copy of the relevant documentation.

it was designed for usage in controlling gas and wind turbines. The Mark V series includes built-in diagnostics and a triple-redundant design that can also be used with a Simplex system should the need arise. This series also offers online maintenance as well. General Electric no longer manufactures this part, but it is available from AX control as a reconditioned and fully-tested unit.

The DS200FGPAG1AKD has over twenty-five integrated circuits as well as five resistor arrays. This board has several electrolytic capacitors as well as twenty-three heat sinks scattered across its surface, in addition to the singular varistor and ceramic disc capacitor. The board also sports a line of red diodes. The board has three transformers set on its surface, as well as an inductor coil. There are also holes drilled into the corners, around the edge, and in the direct center of the board to allow for mounting. Beyond that, there are numerous metal film and CCR resistors set into the board as well. Each and every component is labeled with either a manufacturer’s identification number or a reference designator.

Manuals, technical sheets, and usage guides are excellent in assisting in the proper installation, usage, and general safety of this part. However, these things can be scarce or hard to come by. If you no longer have access to any of these things, please ask us when you order for a copy of the relevant documentation.