Product Description

DS200GGIAG1BLF GE Mark V Bridge Board

The DS200GGIAG1BLF is a board component fabricated by General Electric for use within the Mark V system.  The Mark V Speedtronic system for gas and steam turbine management offers a historical database with a month of data available online and archived data beyond that age.   Communication is available through a variety of interfaces, including Arcnet, RS232 with Modbus protocol, and Ethernet.   Like most systems within the Mark V, communication can be set up with redundant levels to provide modular backups.  The DS200GGIAG1BLF is typically used as a Mark V bridge board. 

The DS200GGIAG1BLF is factory-drilled along each edge and at each corner for the mounting of hardware like standoffs and screws.  It is a large board with multiple components, including many connectors like ten male cable connectors that vary from 12-pin to 40-pin.  All are vertical pin connectors.  The board has six vertical pin header connectors, stab-on connectors, and two small (3-position) terminal strips.  

The DS200GGIAG1BLF has multiple TP test points, five fuses mounted in fuse holders, over fifty resistor network arrays, a potentiometer, LED indicators, and jumper switches.  The board also has resistors, diodes, and capacitors.  Capacitors range from small ceramic to high-voltage electrolytic capacitors.  

Other board components include integrated circuits, heat sinks, inductor coils, and transistors.  For a more detailed description of the board, its installation and use, and proper handling instructions, please refer to data sheets, user guides, and manuals from General Electric.   Please note  DS200 boards are an original board series that does not include firmware updates; if you need firmware updates for proper compatibility with your system please refer to comparable DS215 board listings on our site.