Description The 3500/64M Dynamic Pressure Monitor is a single slot, four-channel monitor that accepts input from high temperature pressure transducers and uses this input to drive alarms.  The monitor’s one measured variable per channel is bandpass dynamic pressure. You can use the 3500 Rack Configuration Software to configure the bandpass corner frequencies along with an additional notch filter.  The monitor provides a recorder output for control system applications.The primary purpose of the 3500/64M Dynamic Pressure Monitor is to provide the following:l Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarmsl Essential machine information for operations and maintenance personnelEach channel, depending on configuration, conditions its input signal to generate various parameters called measured variables. You can configure alert and danger setpoints for each active measured variable.