Product Description

The GE Cell State Sensor Board DS200CSSAG1AAA contains two 40-pin connectors and is 4 inches in height and 11 inches in width. It also contains one 4-pin connector and one 9-pin connector. The GE Cell State Sensor Board DS200CSSAG1AAA also has holes for installing the board in the board cabinet. The drive cabinet is engineered with a rack for the installation of the board and it has matching holes that you can align the board with for installation. When you install the board use any washers that come with the board along with the screws.  

When you install the board, don’t over tighten the screws because it might cause the board to crack, splinter, or break. Only tighten the screws to provide a moderate amount of torque. The washers will help by applying the pressure of the screws to a larger area of the board.

When you install the board in the drive make sure you don’t drop the screws, screwdriver, or other supplies in the drive. If you do, stop the installation and find the item that fell in the drive. The fallen items might damage other components. If the items are not found and you apply power to the drive, the items might cause an electric shock,  fire, or cause further damage to the drive.  

The screwdriver and all other tools must be inspected and be certified for the purpose of being used in electrical applications. This is to assure that the insulation material insulates the user against shock.