Product Description

The GE Firing Circuit Control Board DS200FCRLG1 features 27 bayonet-type connectors. It is also populated with 27 jumpers, 1 34-pin connector, and 1 9-pin connector. The GE Firing Circuit Control Board DS200FCRLG1 is one component in a complex drive. Many of the components in the drive are heat producing. The electrical components embedded on boards produce heat and so do the moving parts, including the powerful electrical motor. To enable the board to work effectively and without error, the drive must be installed in a location that is cool or room temperature. The location must also be dust free and clean. That is, free of oil, grease, and dirt. To select a location for the installation, choose a space for the drive with at least 18 inches between the drive and other equipment. This gives room for all equipment to dissipate the heat they generate. The drive needs a constant supply of cool air to circulate through it and keep the components below a threshold.

If the space has heat-generating equipment in it, you might need to install fans to help cool the drive. Makes sure enough fans are installed and that they are in good condition and reliable. Keep the fans on whenever the drive is operating and make sure they are positioned to direct cool air over the drive.

If the components become too hot and the temperature rises above the threshold, an over temperature condition  will exist and the drive will shutdown without human intervention. The over temperature condition is recorded in the error log and the log is included in the diagnostics tools report.