Product Description

The GE High Voltage Gate Interface Board DS200FHVAG2ADA is an interface between the SCR bridge and the LCI power converter and also provides cell monitoring functions to the LCI power converter. The DS200FHVAG2ADA boards features a fiber optic connector that requires some consideration. The connector transmits a status of the board to the receiving equipment.

There might be a cause for the connector to be without a cable installed in it for a period of time. If that is the case, simply install a plug cover over the connector to prevent dust or dirt to settle on the connector. To maintain a high-quality signal, always install a plug when you disconnect the fiber optic cable from the connector.

The DS200FHVAG2ADA board is packaged in a shipping container to protect the board from damage. Inspect the box for evidence of damage, water damage, or that the box was opened during transit. Cut through the security tape and examine the contents. Save all the manuals and other written material for future use. Notice that the board is contained in a static safe bag. The only safe way to hold the board is by the edges to protect the delicate components on the board. When you are prepared to install the board, pick it up and locate a bare metal surface near the drive. Right before you install the board touch the board to the bare metal for a few seconds. Any static on your body or the board will be drained off.