Product Description

The GE Field Supply Amplifier Board DS200FSAAG1 features 5 jumpers, one 10-pin connector, and two fuses. It is also populated with multiple test points. The GE Field Supply Amplifier Board DS200FSAAG1 has four holes that enable you to mount it on the standoffs on another device. Align the four holes on the board with the standoffs and use screws to attach the board. Once attached, you cable the board to the device and the drive component work together.

There are only 4 capacitors on the DS200FSAAG1 board. Two of the capacitors on DS200FSAAG1 are located on the right-hand side of the board. The other two capacitors on the board are located on the left-hand side. The capacitors store high voltage and also release it during normal operation of the board.

The board also is populated with five jumpers. Some of the jumpers are only used during the manufacturing process to test various signals and circuits in the board. And the jumpers cannot be moved by the servicer because the alternate position is not a supported configuration. However, other jumpers can be used to configure the board by changing the functionality of the board. To read a description of the jumpers on the board, review the product information that was supplied with the original board from the manufacturer.

Consider that when you are replacing a defective board, to obtain the same functionality in the replacement board, position the jumpers on the replacement board to match the positions on the defective board.