Product Description

The DS200KLDAG1 is a GE Mark V Speedtronic component board.  The Mark V is one of the later gas/steam turbine control systems released as part of the Speedtronic line.  It includes TMR architecture with available online maintenance and built-in diagnostics.   AX Control has DS200KLDAG1 available as reconditioned units that have been thoroughly tested by our in-house technicians and as liquidated new-used stock. 

The DS200KLDAG1 is an LED Display Control Board.  This rectangular board has seven small auxiliary boards, each with an LED display that is capable of displaying up to ten sixteen-segment digits.   The auxiliary boards connect to the primary board using brass pin connectors and are held in place by standoff pins.  

Other board components on the DS200KLDAG1 include a single vertical pin cable connector, three jumper switches, a transistor, thirty-two individual red LED indicators, fourteen resistor network arrays, two right-angled connectors, diodes, resistors, and capacitors.  The board also has eighteen integrated circuits.  This includes three field programmer gate arrays and an oscillating chip.  

The DS200KLDAG1 is marked with the GE logo, with codes like 6BA03, and C-ESS.   The edges of the board are drilled for mounting and marked for alignment.  For a more detailed description of the board and its use, or for step-by-step instructions regarding proper handling or installation, please refer to technical support products like user guides and manuals from GE.