Product Description

The GE Cell State Sensor Board DS200CSSAG1BCB contains two 40-pin connectors and is 4 inches in height and 11 inches in width. It also contains one 4-pin connector and one 9-pin connector. The GE Cell State Sensor Board DS200CSSAG1BCB is a standard size for boards installed in the drive. The board rack is engineered with rack space that accommodates the board with screws holes that align with the board. When you are in the process of removing the board from the drive, use a screwdriver to remove the screws and washers that hold the board in place.  Do not let any of the hardware fall into the drive.  It is best practice to use two hands when you remove the board. Use one hand to turn the screwdriver and the other hand to hold the screws, washers, and other hardware. Keep the hardware together and you might need to use it when you install the new board.

If it happens that some hardware falls into the drive, stop the replacement procedure and search for the hardware. If metal parts are left in the drive, it is an electrical hazard and might damage components or cause a fire.  Look for hardware lodged in the moving parts also. If moving parts are jammed, it might damage parts. Before you restart the drive, inform other individuals in the area of the procedure. It is best practice to clear the area before you restart the drive to avoid injury.