Product Description

The DS200CTBAG1A is a GE Mark V DS200 Control Card that was used to help control turbines. It is now a legacy series part and may be a little hard to find. AX Control does attempt to keep this card in stock as a refurbished or new surplus stock part.

The DS200CTBAG1A is a printed circuit board that is a part of the GE Speedtronic MKV Gas turbine control system. It is meant to be a termination board for the system’s common data processor. This card is located within the C core of the system. Its main terminal signals are Ma. Input, Ma. Output, communication link to IONET, and communication link to ARCNET processor. There is an RS-232 9-pin d-shell connection serial port on the card that will allow for TIMN diagnostics. There are two factory drilled holes on each of the short ends of the card that are used for mounting it into place. There is also a total of 23 red varistors on the board and seven diodes. There are also a number of resistors.

When installing this board, it is important to make sure you wear an antistatic wristband to keep the components within the turbine system from receiving a static shock. To prevent equipment damage or personal injuries, only personnel who are trained and familiar with this type of equipment should install this circuit board. For more information on the DS200CTBAG1A and how to install it, please consult the user’s manual and data sheets initially provided by GE.