Product Description

The GE Generator Control Turbine Board DS200CVMAG3 contains two 16-pin connectors and one 2-pin connector. The board also is populated with 6 test points. The installation of the board requires the installer to potentially be exposed to high-voltage conditions so only qualified individuals should perform the procedure. The installer must know the written procedure for the installation of the board as well as other important information.  A knowledge of the drive and the high-voltage cabling used to power the drive is necessary and also knowledge about the emergency cut off devices installed near the drive is important also.

In case an emergency arises, it is important to know the location of the shut-off device and how to activate it. Before starting, the installer must make sure the emergency-shutoff is operational.  A knowledgeable installer will work with an assistant or partner on site while the replacement procedure is in progress. The assistant is there to help the installer and be able to turn off the power in an emergency. Another important initial step is to look for water or moisture on the floor surrounding the drive.  You must make sure the drive is dry and free of water to prevent electric shock as well as the risk of slippage.

Make sure the area has only three prong electric cords to reduce the risk of electric shock. Remove all cords that have only two wires and clear away any devices connected to them. Inform individuals in the surrounding area of the replacement work to reduce the convenience to their work schedules.