Product Description

The GE Insulated Gate Bipolar Transistor (IGBT) Board DS200IIBDG1AEA contains nine indicator LEDs that provide a status of the board while in operation. The LEDs are visible from the interior of the circuit board cabinet and are red in color when lit. Consider that because you can only see the LEDs with the cabinet door open and when the drive is powered on, you must observe some guidelines to avoid electric shock to view the LEDs. All boards must be considered to be high-voltage components and you must not come in contact with anything in the board cabinet.

Also, do not allow anything to drop in the cabinet while the door is open. If a screw, piece of wire, or other item falls in the cabinet, you must remove all power from the drive. Then, wait three minutes for all power to leave the components. Then, locate the item and search for other parts that might have fallen in. You might have to vacuum out the components to ensure all debris is removed.

The GE Insulated Gate Bipolar Transistor (IGBT) Board DS200IIBDG1AEA contains one 34-pin connector to which you connect a ribbon cable. When you connect the ribbon cable, only grasp the cable from the connector and press the connector into place. Never pull the ribbon cable out by holding the ribbon cable.

The DS200IIBDG1AEA contains three 8-pin connectors on the board and the connectors are labeled APL, BPL, and CPL. The cables for the connectors  are routed inside the cabinet and are connected to other boards inside the cabinet.