The GE Mark V DS200IMCPG1CCB functions as an IGBT P/S board within the GE Mark V Speedtronic series.

Product Description

The DS200IMCPG1CCB is a power supply interface board from General Electric.  This component is part of the Mark V series, which was one of the later Speedtronic series released by GE.   The DS200IMCPG1CCB board typically connects via cable to the 1PL input connector on the SDCC drive control board.  

The DS200IMCPG1CCB is a heavily populated board that includes a small three-position terminal strip in its lower right-hand corner.  Additional connectors include multiple vertical pin connectors with a varying number of pins, as well as stab-on connectors. 

Several fuses and metal oxide varistors are located on the board’s surface to protect from changes in voltage.  Blown fuses can be removed and replaced if required.   Be sure to remove power from the board before switching out components, and only do so after testing the board with a current tester. 

Other board components include heat sinks, resistor network arrays, transformers, transistors, integrated circuits, resistors, jumper switches, and capacitors of varying power.   The board also has two LED indicators located toward its center. 

The board is drilled along its edge and in each corner to allow for mounting options.  Most components carry a reference designation and may also be marked with other codes for identification.   For additional information regarding the installation or use of this board, please refer to original documentation from the original equipment manufacturer.  

AX Control ships orders from our North Carolina warehouse several times each day.  Most orders received before 3 pm will be shipped the same day.  If you have questions regarding shipping options or payment terms, feel free to contact our staff for more information.